Main parameter
1.De-coiler: manual operation, passively de-coiling
2. Loading of de-coiler: 5 T
3. Frame of machine: welded with 350H beam steel
4. Thickness of wallboard: 16mm
5. Guide feeding way of forming: side direction roller type
6. Forming machine type: wallboard and chain drive
7. Diameter of shaft: ￠75mm
8. Chain: 16A single row
9. Motor power of forming machine: 5.5KW
10. Line speed of forming machine: 18 m/min
11.Steps of forming machine: 16/14
12.Roller material: superior 45# steel forging
13.Thickness of Chrome plated on roller: 0.05mm
14.Hydraulic station motor: 4 KW
15.Hydraulic station oil pump: gear pump
16.Cutting way: cut off before/ after hydraulic shaped
17.Cutting blade material: Cr12
18.Cutting blade heat treatment: HRC58º-60
19.Rolling thickness: 0.3-0.8 mm
20.Feeding width: 1250mm
21.Precision of cut-to-length: ±2mm
22.Frequency changer : Tricrystal
23. Computer adopts PLC : Panasonic
24. Computer operation panel adopts touch screen
25. Voltage: 380V/50HZ, 3 phase
26. Dimension of machine: 6.8 M x 1.7 M x 1.5 M
Profile drawing
Technological process
Passively de-coiling → Guiding & Feeding material → Roll Forming → Cutting-to-length → Output panel
Technological process figure
